At Work | 2007
Summary of maintenance and special projects completed in 2007.
Chippewa Creek Bank Erosion
The Chippewa Creek stream channel had eroded the east bank causing instability of the bank and loss of soil.
Structure 3L Pipe Replacement
Little Chippewa Creek structure 3L had rusted out to the point where the banks had eroded back to the asphalt driveway often used by Morton Salt.
Grate Replacement on Dam VIII-C
During annual dam inspections, one section of protective grate on the top of the outlet structure at the River Styx dam was missing, creating a safety hazard.
Structure 30L Pipe Replacement
The outlet of this structure and bottom of the drop inlet had severely deteriorated. The entire structure was replaced with N-12 pipe.
Spillway support cradle II-A replacement
The concrete cradle that supports the principal spillway pipe at Dam II-A near Ryan Rd. had deteriorated, exposing the reinforcing steel.
At Work | 2007
Since the beginning of the Chippewa Flood Control System, and during the past twenty-five years, much of the needed maintenance could not be completed as planned due to lack of funding. This caused many of the channel banks to become overgrown with woody vegetation, which made it near to impossible to maintain the banks or the culverts installed for the purpose of draining the floodwaters. In addition, as trees grew, many would lose branches or fall into the channel causing log jams, bank erosion, and more localized areas of flooding due to the inability of the stream flow to get through the blockage.
Maintaining the 33 miles of channel helps to ensure that flood waters will recede from the land, quickly and efficiently.
An effort by the Chippewa Subdistrict has been made to provide funding through an assessment permitted by the Conservancy District Laws of Ohio.
These assessment dollars, which can only be spent on maintenance of the Chippewa Flood Control Project, have been utilized on several projects designed to return the Project to its original design objectives.
*For activities prior to 2005, contact us.
Maintenance Activities
Maintenance Activities must be done consistently to keep the Flood Control System working properly. Dams and channels must be mowed annually to manage woody growth, and provide access to allow for equipment and inspections. Visit Structure 30L project to see a recent example of maintenance.
When the Chippewa channel was constructed, nearly 500 pipe structures were installed. These structures used corrugated metal pipes (CMP), which vary in diameter and length, and are an integral part of the System as they move runoff water safely into the channel. The CMP pipes have exceeded their lifespan and are being systematically replaced with superior quality pipe, such as high density polypropylene (HDPP) or high density polyethylene (HDPE). These new pipes are intended to last for many decades.
Special Projects
Special Projects vary each year and involve items of work that are outside the usual scope of maintenance. They are necessary to keep pace with new standards and regulations, as well as changes in the Watershed.
Visit the spillway repair for Dam II-A. This was a Special Project allowing us to renovate a critical component of Dam II-A.